1974 Toyota Hiace Brake Master Cylinder.

Has anyone got a brace master cylinder for a 1974 H10 Hiace knocking about?

I assume you mean a brass master cylinder ? Do you have a picture, any markings on it ? Parts are a bit of a mare for the early cars, plus there are so many variations, front discs or drums ?

21 minutes ago, flash22 said:

I assume you mean a brass master cylinder ? Do you have a picture, any markings on it ? Parts are a bit of a mare for the early cars, plus there are so many variations, front discs or drums ?

I don't have a picture on me. It's drums all around and it only has one pipe to the reservoir on the top

It may be the same as the 77- 82 one, Single M/C (2 bolt) 47201-26100, seal kits are available Ert- 200119

a case of try it and see, otherwise it's a specialist rebuild job what isn't going to be cheap

1 hour ago, flash22 said:

It may be the same as the 77- 82 one, Single M/C (2 bolt) 47201-26100, seal kits are available Ert- 200119

a case of try it and see, otherwise it's a specialist rebuild job what isn't going to be cheap

 

Ok.

Thank you very much.

I've ordered this. Hopefully they are the same....

It has RH11 on it!

21 hours ago, flash22 said:

seal kits are available Ert- 200119

I've ordered one of these too. This is the Master Cylinder.

Sorry. Uploading picture failed

Did you find the Master cylinder for H10? I'm trying to find one too. Anyone can help with part number, mine is without servo, single outlet side mountings 100mm apart

45 minutes ago, pawlubabas said:

Did you find the Master cylinder for H10? I'm trying to find one too. Anyone can help with part number, mine is without servo, single outlet side mountings 100mm apart

I didn't. But i did find a repair kit on eBay. That worked perfectly.
 

Hi, Im trying to find a brake master cylinder repair kit for my 1975 RH11V campervan. See photo attached of the single master cylinder. The master cylinders in the repair official manual all seem to be a different type and i can find any repair kits where I am in Australia for the H10 or RH11V models. There is ones for the RH11 but this seems to be a 1982-1985 model which is confusing. Did any of you have this type of mastercylinder and find new parts/seals for it? its the two bolt approxminately 100mm apart unit. Any help will be appreciated as wanting to do a road trip in a couple of weeks and the brake pedal keeps slowely sinking to the floor when pressed which is not good.

I found one on eBay.
All i have to show you is the old add pictures and description. Maybe that will help?
You could try asking on here: https://www.facebook.com/groups/1061652454385925/

I have been recommended these guys a few times

https://www.biggred.co.uk/

edit.

https://www.ebay.co.uk/itm/294461747594

never heard of the brand Chun root (Taiwan) before

Thanks Bob and Paula, Ive joined the facebook group and will make a post there to see if anyone has more info on a seal kit. All the ones I can find are for the second generation and its even the first generation seems to have several different models of master brake cylinders which doesnt help.

With the help of a fellow on the facebook group ive found what I hope to be the right part number (P/N 04471-25021) and just bought a NOS cylinder kit from eBay. Hopefully it works out:

https://www.ebay.com.au/itm/185599836940