I have seen one for sale identical to mine and when I put the registration in it came up Ulez compliant 

can anyone help me ?

Currently run a 2008 AWD HiAce for my tradie van and looking to up grade. Toyota don't make the new model in AWD so wondering if it is possible to convert the new series HiAce into AWD. I believe the existing AWD vans run prado running gear  so would it be possible to do the same with the newer version ? 

I am so puzzled to find a particular Toyota model I believe was made either on the 90s or early 2000s.

I used to drive this car when I was serving the Greek army as military vehicle instructor. I had never seen it before commercially and I can't remember the name of the model. 

It was 4x4 and reminded me of the 90s land cruiser however it was not land cruiser. It had the toyota logo instead of toyota letter at the front grille.

I have tried old toyota catalogues but none of the names ring a bell.

Any help would appreciated.

Also does anyone know of any body shops in Melbourne working with import cars?

Thanks in advance 

But I am looking for some advice, I need  a rear wheel arch panel and a new exhaust for my 1994 4 runner..

Is there anywhere I can get these, or a similar type which will fit?

Thanks,

I'm after a dog guard for my FJ Cruiser, this is an import and they do not appear to be available from the normal UK suppliers. Can anyone recommend a decent universal unit or some other clever ideas?

Many Thanks

Nick

fullsizeoutput_6a58.heic

if you have done this i would be really thankfull for information about how much i have to move the engine mounts, and general tips and trick to make this swap a bit easier, its currently a 2l in the truck 

and a picture of the truck 

Dusty .

I attached some pictures or where the leak is at. I tnink. 

1.  Can someone verify for me whether this is what you are experiencing if you have a 2017 Tacoma.

2.   Is the Beep Beep sound I hear before I can shift into S! a notice type of thing since I can sheft into S! below 20MPH.

3.  Is the situation I described above normal for my transmission and that I do not have a transmission problem but is normal for my transmission?

Thanks for your knowledge and facts in advance.

John 

Recently moved out to NZ from the UK and acquired an imported Japanese 1996 Toyota Sprinter Carib Z-Touring 4WD (1.8 engine, auto). It's basically a Corolla in a push-up bra, and goes pretty nicely. Unfortunately, I have no manual, and even if I did, it would be in Japanese.

One thing that is stumping me is the dashboard compass - this is an LCD affair, labelled "Field Monitor", which gives you the temperature, a compass, and a pretty poor guess at the what the weather is doing.

The compass is about 60 degrees out, and I can't work out how to calibrate it. Next to the Field Monitor is a button saying "Compass Adjust" - if you press this once, the display starts to flash, press it again and it stops flashing. It doesn't seem to behave any differently while flashing (still changes as the car turns), and I can't see that any of the other buttons or dials in the car affect it at all.

Does anyone know how to set this compass, or failing that, how the compasses are set up in Toyotas of the same era?

Cheers,

Alex

(ex of York)

Awaiting your response and thanks in advance.

Anyone have spare full handbrake assembly for Hiace Regius 1998 (Jap import) campervan or know of a stockist/place i could source one please? My van had a professional conversion by Direct Campers (Kilmarknock) straight from import and has been fantastic but unfortunately failed it's MOT yesterday due to handbrake, (keeps seizing when applied and then trying to release). Desperate to get this as want to keep running the van over the winter.

Thanks

Serge

Toyota 4Runner - 2004 AWD Special Edition

I have disconnected the few rubber hoses but they weren't actually holding it down.

I can feel a foam like material underneath around the edges. Could this be semi melted to the engine top and so holding it down?

Any suggestions well received. I don't want to force it.

Recently I have been facing some issues with the sunroof/moonroof on my LC200, (Model Year 2011)
I had been facing an issue with the wind noise and couldn't figure out what it was so i decided to clean the sunroof as it had a lot of sand and dirt built up  assuming that maybe the sunroof wasn't closing properly.

However after cleaning it the sunroof/moonroof is not working(I applied WD40 on the sliders and used a cloth to clean up the dirt collected), it is tilting up and down alright, however it does not slide back and forth.

It tries to slide but gets stuck, you can hear the motor trying to move but it just doesn't seem to work

Any ideas on how I can fix this??

https://www.boslla.com/product/boslla-bullet-h8-9-11-the-worlds-first-4-color-led-headlight

Someone told me to put the 1kz-TE engine which was used in Hilux's in my van ...should be easy to find and is by far the best engine of the lot.

- The Hilux 3.0 L td which came with the 2.8 td engine also, and that the swap should be a simple in and out with no drama.

Does anyone know if this is correct and whether this engine would fit the 1994 Hiace?

Cheers Paul