Am2 fuse replaced but now car not starting

Hi, I had took out the am2 fuse and replaced it with new one but now for some reason the car doesn't start weird. The car is an urban cruiser diesel.  All power is fine tried to knock a little the started motor still no joy.

I can add a video of need let me know.

any help will be greatly appreciated. 

What caused the AM2 fuse to blow ? Was it jump started backwards ? I would look to see what the AM2 fuse feeds

AM2 Feeds the IG2 relay, in turn it feeds the ignition switch in also feeds the BCM via AM2 No.2 7.5a*

* 08/2010 onwards only

25 minutes ago, flash22 said:

What caused the AM2 fuse to blow ? Was it jump started backwards ? I would look to see what the AM2 fuse feeds

Nothing tripped it I had swapped it for newer fuses.

Why change it ? It may just be a junk fuse from China replace it with a better quality one, as they say if it ain't broke, don't fix it

Just now, flash22 said:

Why change it ? It may just be a junk fuse from China replace it with a better quality one

I even put the old one back still the same. Soit seems like some may have reset somewhere?

The fuses I replaced were from Halfords.

I agree Chinese products may not be good hence why I got them from Halfords.

did you get the correct type of fuses

Halfords - the "low-profile mini" fuse is sometimes incorrectly called "Micro" - Micro fuses will fit but will not make a decent connection in a low profile mini fuse box

If in doubt, disconnect the Battery for 20 minutes and let every thing reset

4 minutes ago, flash22 said:

did you get the correct type of fuses

Halfords - the "low-profile mini" fuse is sometimes incorrectly called "Micro" - Micro fuses will fit but will not make a decent connection in a low profile mini fuse box

 

If in doubt, disconnect the battery for 20 minutes and let every thing reset

I will disconnect the Battery thanks in the meantime here is the video 

8 hours ago, muki said:

 

 

 

 

I will disconnect the battery thanks in the meantime here is the video 

I disconnected the Battery and still getting the same. 

Thank you for your help, turns out that the Starter motor had gone.